you can choose color correction for each set of LEDs controlled by the device
to achieve at full power the color white.
What is more, the driver has been equipped with an output for the
temperature sensor and RDM protocol support. The support of the sensor
allows for power reduction depending on temperature.
2
Safety conditions
PX782 is a device powered with safe voltage 12 – 48V; however, during its
installation and use the following rules must be strictly observed:
1. The device may only be connected to 12 – 48V DC with current-
carrying capacity compatible with technical data.
2. All the conductors should be protected against mechanical and
thermal damage.
3. In the event of damaging any conductor, it should be replaced with a
conductor of the same technical data.
4. Only a shielded cable should be used to connect the DMX signal.
5. All repairs and connections of outputs or DMX signal can only be
made with cut off power supply.
6. PX782 should be strictly protected against contact with water and
other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device cannot be turned on in places with humidity exceeding
90%.
5
