9. CONTROLLER CONFIGURATION
The controller works in accordance with a preloaded configuration: in response to relevant events
it executes the programmed actions that can turn on or off the selected configuration items.
Triggering events and starting configuration elements is done in the master controller. Expansion
modules only have additional DMX outputs.
9.1. Calculation of output values
The value on the DMX output depends on currently run scenes, programs and masks, and the
settings of the DMX output channels, and the activated signal transmission from the input.
For each output channel, the highest value of this channel from all running scenes and programs
is taken into account. The scenes and programs are affected by their "master” parameters. In
addition, the calculated value is modified by the "master" zone parameter to which a given
channel belongs.
This calculated value passes through the limitations set by the currently running masks and
limitations set for various DMX output channels.
If signal transmission from one input is turned on, then depending on the settings, the value for
the output channel is taken directly from the input or merged with a value calculated by the
controller in accordance with the pre-set function.
The controller calculates and sends to the output as many channels as there are set in the
settings of the DMX output in the configuration.
ON/OFF INPUTS
DMX INPUTS
ANALO
-
GUE
INPUTS
SMART-
PHONE
EVENTS
LIST
OF
ACTION
OUTPUT
CHANNEL
SPECIFICA
TIONS
DMX
OUTPUT
RTC
CLOCK
ASTRONO
-
MICAL
CLOCK
V
ALUE CALCULA
TION
d
irect value transfer
28
