7.3. DMX Address Settings
[
DMX Address Settings
] option allows you to change DMX-512 channel, which controls
playback and settings of the channel responsible for selection of configuration using external
controller.
[
Play Address
] submenu allows you to set playback control channel. Playback is turned off for
DMX values from range 0-127 and turned on for 128-255 values. Picture below shows a view of
PX245 display after selecting
] and pressing
button.
[
Play address
„enter”
The values of the DMX-512 control signal for the selected by the user channel are described in
the table below:
9
0-127
128-255
Playback control
DMX-512 signal
value
OFF
ON
Remember to save values
before leaving this submenu
by selecting the button
and pressing
„enter”