7.5. Input DMX
7.6. Calibration
This menu provides a graphical preview of DMX-512 signal received by the device.
The presentation of DMX signal:
The value of DMX signal on a given channel is presented in the form white bar, the height of which
varies proportionally according to the relation:
the greatest height - DMX value is 255, no bar - DMX value is 0.
DMX channels are described on the left side, respectively,
1, 129, 257, 385
for subsequent lines.
In addition, each line is divided by dots, where red means another ten channels, and green
additional 100 channels bigger value.
Calibration should be made when audio cable is disconnected. You need only to approve chosen
[
Set
]
„enter
”.
screen-button using
This allows device to adapt to the audio line. Set screen-button using enter.
This allows device to adapt to the audio line.
14
It is recommended to perform the calibration when two parameters visiable in buttom right corner
of the screen next to the
] button differ by at least 10 units.
[
Set