8. CONNECTION DESCRIPTION OF BISTABLE INPUTS
To Sound to Light Converter you can also connect the switches to choose the music configuration
of audio to the DMX signal conversion. This allows to change the currently selected configuration
without DMX controller connected into the installation (and thus an external DMX control).
Schematic connection of bistable switches are shown below:
16
Bistabile swichtes -
configuration selection
1 2 3 4
Cfg1
Cfg2
Cfg3
Cfg4
Configuration
number
Input switches
Cfg5
Cfg6
Cfg7
Cfg8
Cfg9
Cfg10
Cfg11
Cfg12
Configuration
number
Cfg13
Cfg14
Cfg15
Cfg16
Input switches
1
2
3
4
1
2
3
4
not possible
Bistable switches connected on the following inputs can change music configuration number.
The values of set-up music configuration are read by the PX245 in a binary system, where first
input is a value of 1, 2nd input - value 2, 3rd input - value 4 and 4th input - value of 8. How this
feature operates is shown in the following tables:
Turned On (shorting) inputs are shown in the tables in the form of crosses.
If you do not connect the DMX control signal or any bistable switches, the PX245 works with the
music configuration set in
] menu.
[
No DMX Configuration