6.12 DMX output settings
After you select the [DMX Output Settings] menu, the screen displays the
current settings for DMX signal parameters. This menu allows to modify the
parameters of the DMX signal being transmitted by the driver operating in the
master mode. The values shown below are the default settings for the device:
At the bottom of the screen, aggregate [Packet length] and [Refresh rate]
are displayed for the parameters thus configured.
6.12.1 Break Time
Allows to change the length of the interval between successive DMX
packets.
At the top of the screen
next to the option name
are visible important
information that simplify
setting an appropriate
value.
+
120
–
Break Length Time
Minumim 88µs
To save the value before
leaving level up in menu
you need to select floppy
disc button and press
enter
23
Break Time [μs]
120
MAB Time [μs]
60
MBF [μs]
0
Packet gap [μs]
100
Channels number
512
Packet length: 22808[μs]
Refresh rate: 43[Hz]