If the device is receiving a DMX signal, a
[DMX OK]
message in
green
letters is displayed
:
6
Device programming
After confirm selection of the [Menu] option by pressing the
enter
button,
a submenu will display, allowing to select available options. In order to
program any of the options, select an option and confirm selection by
pressing the
enter
button. This will take you to a feature menu screen where
you can set all the parameters and features.
To program any of the options, select it with the dashed outline shown
above using the or buttons and press
enter
to confirm your selection.
10
(001): 255
(002): 000
(003): 255
(004): 000
(005): 255
(006): 000
001
DMX OK
2x RGB
Channels ON
Master OFF
T: 28.8°C
Menu
DMX values at
individual outputs
(001÷006)
a DMX input status message
DMX address of the first output
channel
device operating mode when
no DMX signal is available
status of driver outputs
master status message
temperature as measured by the driver sensor
DMX Address
Driver Mode
Channel's Balance
No DMX Signal
Programs Edit
Scenes Edit
Temperature Limits
Clock and date
Screensaver
Local Settings
PWM Frequency
DMX Out Settings
Input DMX
Internal Smooth
Language
Firmware Info
dashed selection
outline