•
Program 1 – this option sets one of the 8 available programs which
are programmed in the [Program Edit] menu when the driver does not
detect a DMX signal at the input. To change the number of the
displayed program, proceed as described in the [Scene 1] section.
•
Channels On – if the driver detects a DMX signal loss, the output
channels are set to full brightness.
•
Channels Off – if the driver detects a DMX signal loss, the output
channels are disabled, which in turn, will switch off the lamps.
•
RTC Clock – the astronomical clock allowing for switching on and off
e.g. a particular program, scene or lamps according to sunrise and
sunset times or times set by the user. To proceed to program this
menu, you need to select the [RTC Clock] option and confirm your
selection by pressing the
enter
button twice. Then the screen shown
below will display:
Astronomical Clock
04:34:26
20:53:39
Program
ON OFF
01
–
+
–
+
00
–
+
00
–
+
00
–
+
00
–
+
12
–
+
16
–
+
selection of an event that will
be turned on or off according
to the clock settings
setting sunrise
and sunset times
setting the times at which selected
events are to be turned on and off
turn-on time selection field or turn-off time
selection field for a given time at the level at which
the particular fields are located
In the example shown above,
Program 01
will be turned on at sunrise
and turned off at sunset.
16