9
10. REACTION TO DMX SIGNAL INTERRUPTION
This feature is used not only to protect the installation from DMX signal interruption, but also to
control the LEDs without the external controller. After the feature is activated, when the DMX
signal is not present, the module will realize the selected function independently. When the DMX
signal is connected again, the module stops playing the function and starts working according to
the commands transmitted through the DMX line.
To define the individual settings:
1. Enter the individual settings menu (the Ind abbreviation
stands for this menu).
2. With "next" or "previous" buttons choose the first output
settings (Ad1).
3. With "next" or "previous" key set the required value.
You can choose from range from 1 to 512.
4. Set the addresses for the second output and the rest.
ENTER
ENTER
NEXT
NEXT
NEXT
2
3
4
1
If you select the operating mode in the menu, which limits the number of channels in relation
to the maximum value, you can not program individually address that are out of range of selected
mode. For example, when you select mode only address 1 and 2 can be individually assign
the selected value. For the rest from to the unit displays a message that the
address is out of range mode.
ENTER
NEXT
ENTER
NEXT
NEXT
NEXT
ENTER
ENTER
NEXT
NEXT
NEXT
NEXT
NEXT
ENTER
NEXT
NEXT
You can also use one of the
18 factory-defined sequences.
You may adjust the playing
speed and step-to-step fading
smoothness for each program.
To adjust the program's steps
fading speed in one of the
sequences press "enter"
button. Using the "next" or
"previous" button set the
FAd
parameter and press "enter".
Adjust the fading speed from
0 (immediate step-to-step
change) to 100 (change
completely
smooth) with
"next" or "previous" button.
Confirm your settings by
pressing "enter".
feature - description
on next page
The
rEd
denotation is for the
red channel.
The
Grn
denotation is for
the green channel.
The
bLu
denotation is for
the blue channel.
The intensity of each colour
is adjusted in a range from 0
to 255.
on
stands for turning all the outputs on
at 100 %,
oFF
turns all the outputs off.
To define the
scenes by your
own you must enter
the
Sc
option.
To activate the
NO SIGNAL
feature you
must enter the
noS
option.
NEXT
NEXT
