- Action in PX140:
this feature allows you to select an event pre-programmed on the PX140
control that will be triggered with a press of a button. Available options:
- DMX Input Slot - 1 On: a range between 1 and 512;
- DMX Input Slot - 1 Off: a range between 1 and 512;
- Internal Event: between 2 and 1024;
- Sunrise Time Event;
- Sunset Time Event;
- Time Event: a range between 3 and 1024;
- Power ON Event;
- DMX Output Slot - 1 On: a range between 1 and 512;
- DMX Output Slot - 1 Off: a range between 1 and 512;
- Delay: a range between 1 and 512;
- Remote Key 1 - pressed: a range between 1 and 64;
- Remote Key 1 - repeated: a range between 1 and 64;
- Remote Key 1 - released: a range between 1 and 64;
- Input: 1 On: a range between 1 and 24;
- Input: 1 Off: a range between 1 and 24;
- No Action: no action at all.
- 3 colour sliders (RGB)
– you can set brightness of each colour component of an object within
the range between 0 and 255, which changes the colour of an item or its brightness.
- Font:
fields enabling you to select a font, size and colour of a button description;
- Text:
add a description of a button;
- Bitmap: you can change the graphic design of a button;
- Remove Bitmap: delete the graphic design of a button.
14
If you have created a link to a page
and assigned an Event to a button,
the Event will be triggered and the
panel will go to a given page. If you
set up a link to the Main Menu and
an Event, then you will be
redirected to the Main Menu only.
If you set all sliders to ‘0’, the colour of the graphic design will be black, and if you set
them to 255, the original colour will be restored.
