PWA Bernardo 1320 S, Operator'S Manual

Page: 8 / 12

25. Keeping all body parts away from the blade,
use the work lever to begin the shearing
action of the two blades. The shearing action
begins at the left of the workpiece and cuts to
the right (Figure 20 ).
Figure 20
26. When the cut is complete, release the metal
from the rear of the machine.
Lubrication
Figure 21
Table
Fingers
and
Receiver
Blades
Lubricating the machine consists of applying
lubricant to the gears, adjustment screws, and the
roller bushings.
To lubricate the machine with grease:
Open the slip roll cover and brush a light coat
of multi-purpose grease on the gear teeth at
the end of the rollers (Figure 22). Turn the
work lever to disperse the grease.
Figure 22
Rollers
Using a grease gun filled with multi-purpose
grease, wipe both grease fittings off and
apply two pumps of grease to each fitting on
each hub (Figure 23). Turn the work lever to
disperse the grease.
Figure 23