Pro Video Instruments
Vecoax Compact RF series modulator Manual
3
a)
It is recommended to
test the device first on a test bench
for your
application before making it a permanent installation to your system so
troubleshooting is easier.
b)
Connect your included Power adapter the unit.
c)
Once the unit is powered on you will see the main menu.
d)
First, Connect a short piece of coax cable to your TV’s tuner and the other
end to the unit’s RF out.
e)
On the unit press the enter button to enter the menu of the unit. The
second option would be TV Standard.
f)
Set your Standard you require.
If you are unsure most newer TV’s 3 years
and above accept both ATSC(over the air channel) and QAM(J.83B Digital
Cable).
g)
By default, the unit is set to QAM (J.83B Digital Cable) Mode with a
Frequency of 783.000 MHz which is Channel 122. The TV will Scan for the
Frequency and pick up the channel on Cable.
h)
Auto Scan for Channels on your TV. Depending on your Location and
Supported TV standards for your TV such as QAM (J.83B Digital Cable) or
ATSC (Digital over the Air) will determine the Standard you need to set on
the unit. Please Refer to
CUSTOMIZATION
below to change these settings.
i)
Once the channel is found it will display our PVI logo when no HDMI is
connected to the unit.
j)
We can use the Major/
Minor channels on the unit’s settings to
force change
the channel number that is displayed & stored/referred to on your TV. By
default, this is 1.1: Major 1, Minor 1. You may change this if you like to
122.1: Major 122, Minor 1. This will display and be stored as channel 122.1
on your TV.
k)
Once we see our PVI logo on the Channel found on your TV, you may insert
your HDMI source. Please ensure that your HDMI source such as a DVD
player or DirecTV STB is set to a Fixed Resolution of 1080P or 720P.
QUICK GUIDE
–
USA/CANADA
–
CONT.
