Pro Video Instruments
Vecoax Compact RF series modulator Manual
21
I AM LOSING OTHER CHANNELS IN MY COAX NETWORK WHEN I TURN ON THE
PVI UNIT
Check to ensure you are not broadcasting on the same frequency as other signals.
Please refer to our,
“MIXING SIGNALS WITH
OTHERS,”
guide above. It could be that
our unit is oversaturating the other signals as well because of the strength of the
signal. Try lowering the RF level under the,
“
ADVANCE MENU.”
This acts as a digital
form of attenuation. Using attenuators works as well or amplification of the other
signal such as antenna signal coming in before combining it in your coax network.
WHAT ARE ALL THE STANDARDS ON THE UNIT AND WHAT DO THEY MEAN
Each region in the world uses its own Standard that they have adopted. You can check
the standards that are used in your area, online. At the moment this is the current
standards used according to our Sources. You can refer to each Standard and how to
set your unit to these standards above.
USA TV CABLE = J83B mode
USA TV AIR = ATSC mode
EU/CO/NZ/AU = DVBT
LATIN AMERICA = ISDB
CHINA = DTMB
EU = DVB-C
I AM FEEDING A 1080P SIGNAL BUT MY TV SAYS ITS 1080I
Set your Unit to 1080P Mode -> Advance options -> 1080P Conversion -> Auto
This will allow the 1080P signal to pass. If your TV tuner does not support 1080P
through the tuner you will not receive any signal or video. If this happens, switch it
back to “Interlacing.”