Hardware Used
5
1. Ramp comes preassembled. Position the
ramp approximately the ramp’s length out
from the step or platform. Stand ramp up on
end with the open ends down and the handle
side toward you. Reach down and lift first half
of ramp toward the step or landing area and
set it down on top of support. Make sure hook
is pressed firmly against step.
2. Open top half of left side ramp panel (A).
3. Unfold left side ramp panel (A) toward you
and once again make sure ramp hooks are
pressed firmly against landing area.
1
2
3
INSTALLATION INSTRUCTIONS
B
A
B
A
B
A
5
CARE AND MAINTENANCE
These ramps are maintenance free, but to keep product in excellent condition follow these tips.
• Store in a cool dry place when not in use.
• Keep ramp clean and free of debris.
• Do not leave ramp out during harsh weather conditions.
• If ice or snow accumulates on ramp, do NOT use metal objects to remove. Instead, use plastic
shovel or non-corrosive ice melt.
8
Replace the single-fold ramp (A) and
insert the clevis pins (AA) into the
holes to secure it in place.
4.
These ramps are maintenance free, but to keep product in excellent
condition follow these tips.
• Store in a cool dry place when not in use.
• Keep ramp clean and free of debris.
• Do not leave ramp out during harsh weather conditions.
• If ice or snow accumulates on ramp, do NOT use metal objects
to remove. Instead, use plastic shovel or non-corrosive
ice melt (labeled as “pet friendly” or “pet safe” ice melt).
