![PVG SRE CO 30 Series Operating Manual Download Page 61](http://html.mh-extra.com/html/pvg/sre-co-30-series/sre-co-30-series_operating-manual_1628615061.webp)
4
+
We recommend to remove dust and stains on the outside of the heater from time to
time with a damp cloth, otherwise these may cause stains that are hard to remove.
Do not remove any components yourself. Always contact your dealer for repairs.
When the power cord is damaged, it may only be replaced by an authorised
engineer. Use a new original cord.
Q
STORAGE (END OF THE HEATING SEASON)
At the end of the heating season, store the heater in a dust-free place in its
original packaging. Any unused fuel cannot be used the next heating season. We
therefore recommend that you burn up all fuel prior to storing. If there is still
some fuel left, do not throw it away, but dispose of it in accordance with the local
regulations for the disposal of domestic chemical waste.
Always start the new heating season with fresh fuel. When you start re-using the
heater follow the instructions again
(starting from section A and as specified)
.
R
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1
Let the heater cool down.
2
Remove the removable tank from the heater and remove the fuel filter.
Some drops may leak from the filter; keep a cloth at hand. Store the fuel filter
and the removable tank outside the heater.
3
Place the transportation cap into the position of the fuel filter. Press it tight.
The transportation cap will, as much as possible, prevent oil leakage from the
heater during transport.
4
Always move the heater in an upright position.
5
Make the fixed tank empty with a fuel pump before transportation or in case
of wrong or dirty fuel. First remove the fuel filter and then insert the fuel
pump into the empty fixed tank. Follow the same procedure if the fuel tank
contains water.
4
59
transportation cap
p50_61_uk_SRE_CO_30x.indd 59
22-04-14 09:04