OWNER’S MANUAL
用户手册
DMR Digital Radio
9
5. If there is no voice activity for the scheduled time period, the call is terminated.
接收全呼
Receive all call
All call is an individual walkie-talkie call to all walkie-talkie on the channel. It is used to publish important notices that require special
attention from users.
1.When receiving all call,The LED indicator light is green.
2.After the all call is terminated, The walkie-talkie goes into standby mode,If the function of "channel leisure prompt sound" is enabled,
when the release the [PTT] key, you will hear a short prompt sound, Indicates that this channel is now available, but you cannot reply to a all
call.
When you receive an all call, if you switch to another channel, the transceiver stops receiving the full call. During a full call, you will
not be able to use any of the pre-programmed keys until the call is ended.
发起一个对讲机呼叫
Start a walkie-talkie call
You can choose a channel, user ID or talk group in the following ways:
•
Rotates the channel knob to select the channel
•
Pre-programmed one-touch call button
选择信道发起呼叫
Use the channel to place a call
发起组呼
Initiate group call
To initiate a call to a user group, the transceiver must be configured to belong to the talk group.
1. Rotate the channel knob to select the channel using the active talk group alias or ID.
2. Hold the walkie-talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth.
3. Press
【
PTT
】
key to the group call, The LED indicator light is red.
4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green.
5. If the function of "" is enabled, when the release the [PTT] key, you will hear a short prompt sound, indicating that the channel is leisure
and waiting for your reply. Press
【
PTT
】
key to reply,If there is no voice activity for the scheduled time period, the call is terminated.
发起单呼
Start a single call
1. Rotate the channel knob to select the channel using the active user alias or ID.
2. Hold the walkie-talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth.
3. Press
【
PTT
】
key to initiate a call, LED indicator light is red.
4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green.
5. If the function of "channel leisure prompt sound" is enabled, when the release the [PTT] key, you will hear a short prompt sound,
indicating that the channel is leisure and waiting for your reply. Press
【
PTT
】
key to reply,If there is no voice activity for the scheduled time
period, the call is terminated.