OWNER’S MANUAL
用户手册
DMR Digital Radio
11
•
In other ways, when exiting alarm mode, the alarm on the current channel can only be temporarily exited. When re-selecting the
channel, the alarm will continue;
The alarm function is enabled for you by the dealer (program path: "Edit -> Alarm -> DMR Emergency Alarm-> DMR System"). Before
using this function, you need to understand the following concepts.
报警类型
Alarm Type
The radio prompts in different modes for different alarm types, as shown in the following table.
Alarm type
Description
Disable
Turn off alarm function
Only alarm
sound
The walkie-talkie to a sharp alarm sound, and the control center will not receive the alarm signal.
Normal
When alarms, the walkie-talkie gives an audible and visual prompt.
Alarm whistle
After sending an emergency alarm signal to the control center, issue a local alarm sound.In the alarm state, there are sound and visual
instructions.
Silent
When alarms, the radio will not give any audible or visual prompt. At the same time, no sound is made on any received audio.
Silence with
voice
When alarms, the radio will not give any audible or visual prompt. However, the radio sounds when you press and hold the PTT
button to initiate a call or respond to a call.
报警模式
Alarm Mode
Except the alarm type
“
Disable
、
Only alarm sound
、
Alarm whistle
”
, other alarm types support the following alarm modes. You can ask the dealer to select one of
them (Note: The following methods use
“
Conventional
”
alarm type as an example).
Alarm mode
Description
Emergency
alarm
Press and hold the [Emergency mode on] button to send an alarm tone to your partners or control center but can
’
t talk to the other
party.
Alarm call
press and hold the [Emergency mode on] button to send an alarm tone to your partners or control center, and then press and hold the
[PTT] button to speak to the microphone, and your voice and surrounding background sound will be sent to the receiver.
Emergency
call
Press and hold the [Emergency mode on] button to enter the emergency call. The product automatically activates the
“
emergency
microphone
”
. You can speak to the microphone, and your voice and the surrounding background sound will be sent to receiver.
发起紧急警报
Send emergency alert
This feature allows you to send an emergency alert, which belongs to a non-voice signal and will trigger a prompt on another transceiver.
1. Press the pre-programmed [Emergency mode on] button.
2. The LED indicator light is red
3.When an emergency alert confirmation is received, an emergency call tone sounds and the LED flashes green.
4. The walkie-talkie exits the emergency alert mode. If your walkie-talkie is set to "silent," it will not any voice in emergency call mode.
接听紧急警报
Receive emergency alert
1. When an emergency alarm is received, a prompt sound is issued, and the LED indicator flashes orange light
2. If enabled, your walkie-talkie will automatically acknowledge the emergency alert.
3. When the alarm sound, the LED indicator flashes as orange light. Press any key to stop the alarm sound. Disables the current emergency
mode by switching channels or turning off the walkie-talkie.
发起警报呼叫（带报警音）
Send an emergency alert with voice follow