OWNER’S MANUAL
用户手册
DMR Digital Radio
10
发起全呼
Start all call
This feature lets you signal all users on the channel. The walkie-talkie must be programmed to allow you to use this feature.
1. Rotate the channel knob to select the channel using the active full call group alias or ID.
2. Hold the walkie-talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth.
3. Press
【
PTT
】
key to initiate a call, LED indicator light is red.
Channel users cannot reply to all calls.
使用一键呼叫键发起组呼或单呼
Use the one-touch call button to initiate a group call or a single call
One-touch calling features make it easy to group calls or single calls to predefined aliases or IDs. This function can be assigned to
short programming or long programming keys.
You can assign only one alias or ID to a one-touch call key, and the walkie-talkie can have multiple programmed one-touch call
keys.
1. Press the preprogrammed one-touch call button to initiate a group or single call to a predefined alias or ID.
2. Hold the walkie-talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth.
3. Press
【
PTT
】
key to initiate a call, LED indicator light is red.
4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green.
5. If the function of "channel leisure prompt sound" is enabled, when the release the [PTT] key, you will hear a short prompt sound,
indicating that the channel is leisure and waiting for your reply. Press
【
PTT
】
key to reply,If there is no voice activity for the scheduled
time period, the call is terminated.
模拟信道呼叫
Analog channel call
On the analog channel, hold down the [PTT] key and speak into the microphone, to transmit. Please release
【
PTT
】
key to receive.
发起呼叫
Start a call
In the analog mode, the upper and lower line codes of DTMF can be configured by programming software, and the upper and lower line
codes can be enabled in the analog channel.When the upper line code is enabled, the upper line code will be issued each time the [PTT]
key is pressed, and the lower line code will be issued when the [PTT] key is released.
五．紧急报警功能
Emergency alarm function
紧急报警
Emergency alarm
In the event of an emergency, you can use this feature to ask your fellow or control center for help. Emergency alarm has the highest
priority, you can alarm whether the walkie-talkie is transmitting or receiving.
Alarm initiator to exit the alarm mode, there are two cases:
•
Turn off the radio to exit the whole machine alarm.
•
Press the preprogrammed
【
Emergency mode off
】
button to exit alarm.