PURSUIT PRO9233Z, Installation And Reference Manual

Page: 1 / 19

Installation and Reference Guide
2020 Voxx Electronics Corporation. All rights reserved. PRO9233Z_RevA_08/20
2 Wire Harness Colors and Functions
2 Input / Output Connector
4 Control Connector
5 Door Lock Connector
6 External Components
6 Shock Sensor
6 Valet / LED
6 Data Bus Interface (DBI)
6 Telematics
7 Setup Options
7 Security Control
PRO9233Z
Security Upgrade
11 System Programming
11 Programming Mode Entry / Exit
12 Feature Bank Options
12 Data Port Protocol Selection
12 Dome Light Delay
13 Silent Arm and Disarm
13 User Selectable LED
13 System Diagnostics
13 Troubleshooting Trigger Zones
13 Adjusting Shock Sensor
14 Alarm Override Procedures
15 Wiring Diagrams
15 Door Lock Connections
18 Starter Kill Relay
19 Full System Connections
Thank you for trusting Pursuit products! If you are a consumer, please note:
Professional installation is strongly recommended.
This manual assumes the installer has adequate knowledge of the following expertise. Therefore, it does not
cover these topics in detail:
• 12-volt electronics
• Testing and verifying circuits
• Making safe and lasting wiring connections
• Factory ignition, power, lighting, data bus and sensing systems
• Factory systems and components to avoid
• Safe wire routing, circuit protection and product placement
• Access to vehicle-specific technical information
In addition, this manual assumes the installer has the
proper tools, skill and facilities
to perform a professional installation.
Performing an improper installation could result in damage to the vehicle or its components, improper system function,
unsafe vehicle operation or physical injury. Such instances would not be covered by the vehicle manufacturer's warranty,
nor by Voxx Electronics, Inc.
Detailed Descriptions Quick Reference