background image

PRO9233Z_RevA_08/20

8

 Detailed Descriptions: 

Setup Options

Security Control (Bank 2) (cont.)

 

See page 11 for Programming Instruction.

 Feature 6: 

Door Trigger Delay

Function: 

Set the system to delay the door trigger activation input for five (5) seconds

Setting Choices:

•  Option 1

 - Instant - System will 

trigger instantly

 after the door input is detected.  

•  Option 2

 - Delay - System will 

delay alarm trigger for five (5) seconds 

after door trigger input is detected.

 Feature 5: 

Automatic Arming

Function: 

Set the system to arm automatically after exiting the vehicle. 

Setting Choices:

•  Option 1 - 

System will arm and doors will lock 

only when the alarm is armed from the remote control. 

 

•  Option 2 - 

System will arm 

automatically 1 minute after the last door is closed

, and when the alarm is 

armed from the remote control.

•  Option 3

 - System will 

Arm and Lock doors automatically 1 minute after the last door is closed

, and when 

the alarm is armed from the remote control.

 Feature 9: 

Horn Output Duration

Function: 

Set the horn output to activate for a set time.

Setting Choices:

•  Option 1 - 

Output pulses for 

16

 

milliseconds

.

•  Option 2 - 

Output pulses for 

30

 

milliseconds

.

•  Option 3 - 

Output pulses for 

40

 

milliseconds

.

•  Option 4 - 

Output pulses for 

50

 

milliseconds

.

•  Option 5 - 

Output pulses for 

10

 

milliseconds

.

 Feature 10: 

Override Method

Function: 

Set the Alarm Override Method. This will be used if the Remote is lost or inoperable.

Setting Choices:

•  Option 1 -

 Alarm Override method is normal. 

Ignition Key ON, press Valet button one (1) time.

   

•  Option 2 -

 Alarm Override method is set for a 

Custom Code

.

 Feature 7: 1 or 2 Wire Disarm

Function: 

Set the disarm input detection

Setting Choices:

•  Option 1 - 

2 Wire Detection, Will monitor Disarm input 1 and 2 for disarm pulse.

•  Option 2 - 

1 Wire Disarm, Will monitor Disarm input 1 Only for pulse.

 Feature 8: 

Notification Sounds

Function: 

Set the siren and/or horn to notify when the system is armed or disarmed. (Siren Optional)

Setting Choices:

•  Option 1 - Siren and horn 

will emit audible chirps when the system is armed and disarmed.  

•  Option 2 - Siren 

will emit audible chirps when the system is armed and disarmed. 

•  Option 3 - Horn 

will emit audible chirps when the system is armed and disarmed. 

 

Note: Siren and horn will both sound if the system is triggered, regardless of this setting.

Summary of Contents for PRO9233Z




















Reviews: