PRO9233Z_RevA_08/20
3
Detailed Descriptions:
Wire Harness Colors and Functions
Input / Output Connector (14-pin connector) (Cont.)
See page 19 for the full system diagram.
These wires are listed in order of their placement in the harness connector.
14. GREEN/LIGHT BLUE – Ch. 4 Aux. Output (-)
The GREEN/LIGHT BLUE wire supplies Ground (-) when activated from the remote control.
12. LIGHT GREEN – Trunk Trigger Input (-)
The LIGHT GREEN wire connects a trunk switch that, when triggered, supplies a Ground (-) output. If the system is
armed, this input will trigger the alarm.
13. GRAY/BLACK – Hood Trigger Input (-)
The GRAY/BLACK wire connects a hood switch that, when triggered, supplies a Ground (-) output. If the system is armed,
this input will trigger the alarm.
8. BLACK/WHITE – Horn Output (-)
The BLACK/WHITE wire connects to the vehicle's horn wire and supplies Ground (-) when activated from the system.
Verification:
The vehicle horn wire registers Ground (-) when the horn is activated.
9. BLACK – Ground Input (-)
The BLACK wire connects to a reliable vehicle ground (-) source to power the system.
Verification:
The vehicle ground (-) source wire registers ground (-) at all times.
Note:
Before making this connection, remove all module fuses until the system is completely connected.
10. ORANGE – Starter Kill Output (-)
The ORANGE wire supplies Ground (-) when the alarm is armed and when the remote start is ON.
11. BROWN – Door Trigger Input (-)
The BROWN wire connects to the vehicle's door trigger wire. This wire will detect Ground (-) input.
Verification:
The vehicle door trigger wire registers Ground (-) when a door is opened and opposite when closed.
Note:
If the door registers as 12-Volt (+) when the door is opened, use the PURPLE (Pin 5) input.
