Purple Line EGO400 User Manual Download Page 19

Purple Line®

      

Page 12 

Ref: CM-UM-0115-Rev.C AUS

AUS 

Purple Line Pty Ltd

 

246A Governor Road

 

Braeside

 

VIC 3195

 

AUSTRALIA

 

 

Web: www.purpleline.com.au

 

Tel: +6 1 (0) 3 9588 2959

 

Email: [email protected]

Purple Line® caravan mover systems are provided with a parts only warranty for a period of 2-years from the date of 

purchase. Any warranty claims must be directed through the place of purchase with a proof of purchase provided. 

Within this two year period, the manufacturer will, at their sole discretion, replace or repair any parts that have failed if 

deemed to be due to a manufacturing defect. 

The manufacturer reserves the right to charge for any repair, or costs incurred whilst processing a claim, that is deemed 

to be due to customer misuse or neglect. This warranty is not offered for any type of trade or commercial usage. 

The manufacturer does not take responsibility for any consequential loss whatsoever. 

Upon inspection, components that are missing when checked against the packing contents list must be reported to the 

place of purchase within 5 working days.

Guarantee

Serial No.

EGO130/

EGO400

Date of Purchase  

Name of Dealer

Please fill-in the Serial N additional information and retain this manual for future 
reference. There are two serial numbers that are sequential and they are stamped onto inside 
faces of the gearbox.

Contact Information

+

Product Registration

Please register your Purple Line® caravan mover online within 14 days of purchase. 
Registration is quick and simple, go to www.purpleline.com.au/product-registration. Please 
retain your original purchase receipt.

PL CM manual AU 01-15.indd   12

14/1/15   10:43:43

Summary of Contents for EGO400





















Reviews: