Electrostatic Precipitator (ESP)
Filter Unit
Technical and Operations Manual - Storage, Unpacking and Handling
12
3. Storage, Unpacking and Handling
3.1 Storage
Prior to installation, each ESP Filtration Unit must be stored in its original packaging in dry
conditions.
3.2
Shipping List
Each Unit is shipped with the following:
●
ESP Filter components - Mesh Filters and Collector Cells.
●
This Technical and Operations Manual.
3.3 Unpacking and Handling
Before installing:
1.
Strip away all packaging, wrapping and strapping (this must only be done by trained,
professional installers).
2.
Open the Unit and carefully remove all Mesh Filters and Collector Cells and place in
a safe and secure position, away from the installation area.
This operation will greatly reduce the weight of the Unit and allow much easier
installation.
3.
Once the Unit have been successfully installed, carefully replace the Mesh filters
and Collector Cells, ready for commissioning.
WARNING!
The Unit is heavy and the appropriate lifting and handling practices
must be observed, for both unpacking and installation, to avoid
personal injury or damage to the equipment.
See the Technical Specifications for Unit weights.
