![PUREWAVE BBT-GEN-3.5KWINV Owner'S Manual Download Page 8](http://html1.mh-extra.com/html/purewave/bbt-gen-3-5kwinv/bbt-gen-3-5kwinv_owners-manual_1627950008.webp)
8
WWW.BBTA.COM.AU
BBT-GEN-3.5KWINV
Control Function
Oil Warning System
When the oil level falls below the lower level, the engine stops automatically.
Unless you refill with oil, the engine will not start again.
Engine Switch
The engine switch controls the ignition system.
• ‘ON’(run) - Ignition circuit is switched on. The engine can be started.
• ‘STOP’ - Ignition circuit is switched off. The engine will not run.
• ‘START’ - Starting circuit is switched on. The starter motor starts.
Economy Control Switch
When the economy control switch is turned ‘ON’, the economy control unit control
the engine speed according to the connected load. The results are better fuel
connection and less noise.
DC Circuit Protector
The DC circuit protector turns off automatically when the load exceeds the
generator rated output.
Reduce the load to within specified generator rated output if the DC circuit
protector turn off.
Fuel Tank Cap Air Ventknob
The fuel tank cap is provided with an air vent knob to stop fuel flow. The air vent
knob must be turned once clockwise from the closed position. This will allow fuel
to flow to the carburettor and the engine to run.
When the engine is not in use, tighten the air vent knob counter-clockwise until it
is finger-tight to stop fuel flow.
Fuel Cock
The fuel cock is used to supply fuel from the tank to the carburettor.
Remote Control Switch
The remote control switch controls the ignition system
• ‘ON’ - The starter motor starts.
• ‘OFF’ - The engine will not run.
Brake Lever
The function of brake lever is preventing generator moving.
• Brake lever is not working, generator can move.
• Brake lever is working, generator can’t move.
CONTROL FUNCTION
CAUTION
All manuals and user guides at all-guides.com