manualshive.com logo in svg

PUREWAVE BBT-GEN-3.5KWINV, Owner'S Manual

Share
Download
PUREWAVE BBT-GEN-3.5KWINV Owner'S Manual Download Page 4

4

WWW.BBTA.COM.AU

BBT-GEN-3.5KWINV

IMPORTANT SAFETY INFORMATION

Additional Information and Potential Changes

We reserve the right to discontinue, change, and improve our products at any time without notice or obligation 
to the purchaser. The descriptions and sections contained in this manual were in effect at the time of printing. 
Equipment described within this manual may be optional. Some illustrations may not be applicable to your 
machine.

WARNING: Read and thoroughly understand all instructions in this manual and on the safety decals 
before assembling or operating this Generator. Failure to do so may cause serious injury or death. 
Do not allow anyone to operate this Generator who has not read this manual. As with all power 
equipment, a Generator can be dangerous if assembled or used improperly. Do not operate this 
Generator if you have any questions concerning its safe operation. To get answers to any questions, 
call our Customer Support Department.

This SAFETY ALERT SYMBOL identifies important safety messages in this manual. Failure to follow 
this important safety information may result in serious injury or death.

DANGER! This Generator was built to be operated according to the safe operation practices in this 
manual. As with any type of power equipment, carelessness or error on the part of the operator can 
result in serious injury. Failure to observe the following safety instructions could result in serious injury 
or death.

The following signals, words and meanings are intended to explain the levels of risk associated with this product.

DANGER indicates a hazardous situation which, if not avoided, will result in serious injury or 
death.

WARNING indicates a hazardous situation which, if not avoided, could result in serious injury 
or death.

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or 
moderate injury.

NOTICE is important information about the proper use of your Generator. Failure to follow 
this instruction could result in damage to your Generator or property.

WARNING!  Your Responsibility—Restrict the use of this power machine to persons who have read, 
understood and will follow the warnings and instructions in this manual and on the machine.

SAVE THESE INSTRUCTIONS!

All manuals and user guides at all-guides.com

Summary of Contents for BBT-GEN-3.5KWINV





























Reviews:

No comments

Brands by name

Popular brands

Load more brands