User Manual
PT-PSW-92
10
4.
Button Control
Front panel buttons can be used for switching operations and volume adjusting.
4.1
Manual Switching
Press
1-HDBT/PoH
,
2-DP
,
3-HDMI
,
4-HDMI
,
5-HDMI
,
6-HDMI
,
7-HDMI
,
8-VGA
,
or
9-VGA
on front panel to select the corresponding input source.
4.2
Auto Switching
Press
AUTO
to enter in auto-switching mode.
The auto-switching mode abides by the following principles:
New input
Once detecting a new input signal, the switcher would switch to this new signal
automatically.
Rebooting device
PT-PSW-92 have the ability to save the last configuration before losing power. If
the last switching mode is auto-switching, once rebooted, the switcher will
automatically enter auto-switching mode, then detect all inputs and memorize
their connection status for future rebooting using. If the last displayed signal is
still available, the unit will output the signal. If not, the unit will detect all the
input signals wit priority from 1-HDBT/PoH to 9-VGA. When detected the first
signal, it will transfer to output.
Signal removal
Once removing the current display signal, PT-PSW-92 will detect all input signals
with priority from 1-HDBT/PoH to 9-VGA. It will transfer the signal firstly detected
to be available to output devices.
