User Manual
PT-PSU12
14
Command
Function
Feedback Example
FA XX XX XX XX
XX XX XX XX XX
XX XX XX XX XX
XX XX FE
Modify product name.
The command has 18 bytes in total,
and 16 bytes are effective. The digit 0
is used for padding.
For example: FA 50 54 4E 00 00 00 00
00 00 00 00 00 00 00 00 00 FE
FB XX XX XX XX
XX XX XX XX XX
XX XX XX XX XX
XX XX FE
Modify product model.
The command has 18 bytes in total,
and 16 bytes are effective. The digit 0
is used for padding.
For example: FB 54 50 55 48 2D 50 53
55 31 32 00 00 00 20 00 00 FE
Note:
After sending the
“Output/[x]V/[y].”
to change the output voltage, the
corresponding output channel will be switch off, the command “
[x]@.”
should be
sent to switch on this output channel again.
After sending the
“LockKeyboard[x].”
to lock the front panel, the device can be
controlled via RS232 commands and web-based GUI.
Summary of Contents for PT-PSU12
Page 35: ...User Manual PT PSU12 ...
