PureTools PT-MA-HD44M, User Manual

Page: 21 / 28

User Manual
PT-MA-HD44M
2
The following table is only an example.Please refer to the list of instructions.
Type Format Value Regulation
Command head #cmd
Explain
Can be used to search command,after receiving command, the system
will feedback all open command format fields
Example1
#cmd
Search all open command
Web Control
Default IP address for log-in:
192.168.1.168
Change IP address of PC
Before configuring the device through the website, it is necessary to configure the IP
address of the computer configured with the device (mainly to ensure that the
computer and the device are set in the same network segment).
1). Open the network control center and set the computer's IP address
：
2). Choose to use Static IP, with the IP address set to 196.168.1.x (x ranges from 0 to 254, but
cannot be consistent with the device's IP address),
3). Subnet mask set to 255.255.255.0
4). Gateway set to 192.168.1.1