12
Phone Operation
Below you will find an overview of how you operate the Phone Clip 2 when
using it in connection with phone calls.
Note: Except for the answer and end call operations one or more of the
below described operations may be phone dependent, i.e. they may either
differ slightly or be absent altogether.
Answering and ending a call
Rejecting a call
Transferring a call initiated on the mobile phone to Phone Clip 2
Put an active call on hold
Last number redial
Push the call pick-up/hang-up button once.
If another call is already active it will be terminated and the new incoming
call - indicated by knocking tones - will become active. If another call is
currently on hold it will become the active call instead.
Double click the call pick-up/hang-up button.
If another call is already active it will remain active, only the new incoming
call – indicated by knocking tones – will be rejected.
Push the call pick-up/hang-up button once.
Press and hold the call pick-up/hangup button for 2 seconds.
If another call is currently on hold or an incoming call is pending - this will
now become the active call instead.
Double click the call pick-up/hangup button while no call is active nor
pending. If two mobile phones are connected this operation applies to
the last paired mobile phone.
