8
Installation & Operation Manual
Copyright © Puretec Pty Ltd 2018
Assembly (BL3 Model)
Step 1
.
Connect the retaining screw and braided hoses to
the faucet and tighten them.
Only use hand to screw the flexible hose. Do not
over tighten. Don't use any tools.
See connection pattern on Page 8.
Step 2.
Connect the straight adaptor to the filtered flexible
hose.
Step 3.
Feed the hoses through the basin or
sink. Required through hole size is
Ø33mm.
Base and washer should be on top of
the sink.
Step 4.
Insert the plastic fixed nut, rubber
washer, metal washer and screw the
nut by turning counterclockwise.
Step 5.
Position the tap on your desired angle
and tighten the nut by using a wrench.
Fig. 5
Fig. 6
