14
Installation & Operation Manual
Copyright © Puretec Pty Ltd 2021
Assembly
Figure 7 - SmartTee™ Quick Connect Fitting
2. Cut the tube square and push into into the tube stop (inside
the collet). For metal tube; remove burrs and chamfer tube
end to prevent O-ring seal being damaged.
6. Push the collet against the quick connect nut and slide tube
out of fitting.
3. The fitting grips before it seals. Ensure the tube is
pushed all the way into the tube stop.
4. Once the tube is secured in position, turn the quick connect
nut clockwise to secure.
Note: Hand tighten only. Do not overtighten.
1. Turn the quick connect nut on the SmartTee™ anticlockwise
to release the collet.
5. Turn the quick connect nut on the SmartTee™
anticlockwise to release the collet.
DISCONNECTION PROCEDURE
Summary of Contents for Tripla Z1-T1
Page 24: ......
