3
HYBRID SERIES
| Filtration & Ultraviolet Disinfection All-in-One Unit
Puretec Customer Service
Thank you for purchasing a Puretec Hybrid Series Whole House UV Water Treatment
System. Your system is a proven performer manufactured from quality materials and
components and will give years of ‘spring like’ water, free of impurities, if maintained
and installed properly (refer installation requirements p.6).
Introduction
Puretec Hybrid Series is specifically designed to kill harmful bacteria in untreated water
supplies. It uses a natural purification process that’s eco-friendly and
chemical-free. It includes pre-filtration to ensure that particulate matter does not shield
micro-organisms from the UV light.
This system will effectively treat water, depending on the required UV dosage and
existing water quality.
The system is designed for mains and rainwater supply but can be used in other
situations. For other types of water supply please contact your local Puretec stockist or
call our Puretec Customer Service Helpline on 1300 140 140 (Australia) or
0800 130 140 (New Zealand).
The Puretec Hybrid system cartridges and lamp need replacing regularly to maintain
optimum performance. This is a simple procedure when following instructions. For
replacements contact your nearest Puretec stockist.
Your new Hybrid system incorporates a failure warning feature that warns you of a lamp
failure by:
1.
An LED warning light
2.
An audible alarm
In addition, when the alarm “beeps” on and off, the lamp is due to be changed so
effective treatment is maintained. A Green LED indicates that the system is operating
correctly.
Introduction
Summary of Contents for HYBRID G12
Page 24: ......
