PureMate PM9005W Instruction Manual Download Page 9

WWW.PUREMATE.CO.UK     

English 09

TROUBLE SHOOTING TIPS

PROBLEM

SOLUTION

Unit does not operate.

Unit shuts off unexpectedly.

No air circulating from unit.

Increase in noise level.

An unpleasant odour is
emitted from the unit.

Check that the unit is plugged in.

Check that filter is in place.

Confirm that filter is Genuine Replacement Filter.

Check that the unit is plugged into a working electrical outlet.

Check that the HEPA Filter is firmly in place.

Check that the Rear Cover is latched firmly in place.

Unplug unit. Check Pre-filter/Charcoal & HEPA filters.

Clean Pre-filter/Charcoal if necessary.

Replace HEPA filter if necessary.

Make sure the filters are clean. Replace if necessary.

Make sure the filters are clean. Replace if necessary.

SPECIFICATIONS

Model: 

      PM9005W

Rated 

Voltage:     220-240V 

50Hz  

Power Consumption:   

 

 

 

42W(Low Setting) 52W (Highest Setting)   

Noise Level:   

 

 

 

 

Silent fan ≥ 40 dB(A) (Low), 58 dB(A) (HI)   

Negative Ions:  

 

 

 

 

≥3 ×106/cm

3

  

Removal 

Rate:     Up 

to 

99.97% 

 

UV Lamp wavelength:  

 

 

 

14 uW/m² ( Frequency: 254nm)

Air 

Flow 

Rate: 

     240 

m³/hour 

 

CADR Rating (High speed):   

 

 

183 m³//hour   

Dimensions (L x W x H): 

 

 

 

23(L)x 17(W) x 70(H) CM

Net Weight:   

 

 

 

 

5.15kg (11.35 lbs.)

Gross Weight:  

 

 

 

 

6kg (13.23 lbs.) 

 

Applicable Area: 

 

 

 

 

up to 325 ft

2

(30 m

2

)

DISPOSAL OF THIS DEVICE

At the end of the product lifecycle, you should not throw this machine into the normal

house hold garbage but bring the product to a collection point for the recycling of electrical

and electronic equipment.

Summary of Contents for PM9005W










Reviews: