WWW.PUREMATE.CO.UK
English 6
CARE, CLEANING & MAINTENANCE
Below are the colour/value that can be displayed:
Ring Colour Particulate Matter Value (Range) Air Quality Status
Green
Yellow
Red
Good
Average
Poor
0-100
101-200
201+
Filter Replacement Indicator:
The Replace HEPA light on the display will illumi-
nate and flash indicating that it is time to replace your filter. Replace the filter
according to directions (refer to CARE, CLEANING & MAINTENANCE – FILTER
REPLACEMENT then press and hold HEPA RESET button on your purifier for 5
seconds to reset the system.
UV Bulb Replacement Indicator:
The ‘UV’ light on the display will flash when it is
time to replace the UV bulb. Replace the bulb according to direction. (Refer to
CARE, CLEANING & MAINTENANCE – INSTALLING AND REMOVING UV-C
BULB). To reset the UV-C Replacement indicator, press and hold the UV button to
reset system. Hold for 5 seconds and change reset to start.
** Control Panel Beep/ Sound: The sound emitted from pressing the buttons on the
control panel can be turned off/on by holding the SPEED button for 5 seconds.
•
Your appliance must be switched OFF via the main power supply and unplugged before
proceeding with any cleaning.
•
To clean the exterior surfaces simply wipe over with a clean, dry soft cloth. Avoid all other types
of detergents, cleaners, solvents that may contain chemicals, which could damage parts of the
unit.
•
Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the
appliance.
•
Clean the filter monthly with the brush or nozzle of your vacuum cleaner.
•
Never immerse the appliance in water.
•
Never spray the appliance with liquids or submerge it in water or any other liquid.
•
Do not stick any foreign objects or your fingers inside the unit.
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs
should be undertaken only by a qualified technician.
The Replace HEPA light on the display will illuminate and flash indicating that it is
time to replace your filter. Replace the filter according to directions (refer to CARE,
CLEANING & MAINTENANCE – FILTER REPLACEMENT then press and hold
HEPA RESET button on your purifier for 5 seconds to reset the system.
To Remove & Clean (or Replace) Filter:
