WWW.PUREMATE.CO.UK
English 8
1 Turn off and unplug unit
Press the lock and release
button and remove the rear
cover from the unrt.
4. The UV-C Bulb is removed by carefully grasping the bulb with a clean
cloth or tissue and pulling the bulb straight out of the unit.
3 Use a Philips head
screwdriver to remove
2 screws and detach the
UV-C Metal Shield.
Bulb b NOT visible until the
UV-C METAL SHIELD has
been removed.
5. The UV-C Bulb is reinstalled by sliding it, horizontally, back into the slots at the top of the unit 6.
6. Carefully reposition the metal shield, and replace the 2 screws (do not over tighten).
7. To reset the UV-C Replacement Indicator, press and hold the UV button for 5 seconds.
Cleaning air quality sensor
Use a brush to clean the covering.
Open the covering
.
Clean the dust inlet and outlet as well as the lens with a slightly wet cotton swab. (recommended to
cleanupevery two months)
Close the covering
.
dust inlet
lens
dust outlet
2. Remove the
combination filter.
1.
2.
3.
4.
