www.purelogic.ru
8 (800) 555 63 74
11.
Driver parameter adjustment by configuration program
• Save/Download profile (current parameters) to/from driver non-
volatile memory. 7 memory banks “0”….”6” are available.
• Save/Download profile (current parameters) to/from file.
• Download standard profiles from non-volatile memory.
Standard profiles are developed by Purelogic R&D specialists for
certain type SSM.
If Customer changes profile and wishes driver to operate with it
at every start then it is required to save profile in driver non-volatile
memory bank “0” and set profile downloading from “Bank 0” by SW1,
SW2, SW3 switches. Otherwise profile may be saved in “1”…”6” or to file
for following future use.
If Customer changes profile without it saving then modified profile
will be deleted from memory after de-energizing and driver will
download profile set by SW1, SW2, SW3 (Fig.5) after energizing.
Description of driver control program menu items:
• “Connect/Disconnect” is driver connection setup.
• “Apply” is button that shall be pressed after any profile parameter
change. Parameter is modified physically in driver RAM according
values set in program corresponding fields.
Hot key is ENTER.
• “Save →write profile in memory” is saving of current profile
(parameters) in any of 7 available banks of non-volatile memory. “0”
bank is working “Bank 0” and “1”…”6” banks are additional.
• “Save → write profile in file” is saving of current profile
(parameters) to file. This is very useful for quick adjustment of other
drivers with the same parameters.
• “Download→ Download standard profile is downloading of standard
profiles (according to step motor name)
to driver RAM. Enables driver quick adjustment for SSM certain
model.
• “Download → Download profile from memory” is profile
downloading from 7 available banks of non-volatile memory to driver
RAM. Enables quick downloading previously saved profiles.
• “Download → Download profile from file” is profile downloading
from file to driver RAM. Enables downloading of previously saved profile
from file.
