www.purelogic.ru
8 (800) 555 63 74
10. PC driver connection via USB interface
10
Driver PC connection via USB
PLDS880 driver may be connected to PC via galvanic isolated USB port
for parameter adjustment.
For PLDS880 module PC correct operation configuration
program shall be downloaded and virtual COM-port driver shall be
installed using link: http://www.purelogic.ru/files/downloads/SOFT/
PLDxxx_SW.zip
Module PC connection procedure
•
Connect PLDS880 to PC using A/B type USB cable;
•
Switch on PLDS880 driver;
•
Start configuration program;
•
In configuration program pop-up window specify COM-port
assigned to PLDS880 driver. Port number may be found by pressing
WIN+PAUSE in Device Manager, in Port (COM and LPT) group (Fig. 8).
Then press Connect button (Fig. 9)
Fig. 7 Driver operation mode selection diagram
Fig. 6.
SM and SSM step division selection diagram
