7
MODEL# 9008SJ
ASSEMBLY INSTRUCTIONS
NOTE:
Make sure that you assemble the
T-Section/Legs to the Top Rail as shown to
be certain that the pre-drilled spring holes
are facing in the correct direction when you
attach the springs.
STEP 1
:
A. Slide a T-Joint (Part 2) onto the end of a
Top Rail (Part 1). Next, slide the end of
another Top Rail into this T-Section so
that each Top Rail can be bolted to one
side of the T-Section.
NOTE:
Make sure that the Solid Edge of the
T-Section is facing away from the center of
the circle for each Top Rail Section.
B. Fasten the T-Joint to the Top Rails using
2x Bolts (Part 10), 2x plastic Washers
(Part 13), and 2x Hex Nuts (Part 11).
NOTE:
Do not fully tighten the bolts until all Top
Rails are connected.
Repeat these steps with all Top Rails and
all T-Joints to form the Top Rail Frame.
Once the Top Rail Frame has been
formed, tighten all hex nuts and place
12x Safety Nut Caps (Part 12)
1
(12)
(12)
(2)
(1)
(11)
(11)
(13)
(13)
(10)
(10)
INSIDE