POWER FEED
ADAPTER
7
F
6:
Strip 3/8" off of the Power Feed Adapter wires and the
low voltage power supply wires.
7:
Pull up the levers of one lever nut and insert the low voltage
+24VDC power supply wire and the red wire of the Power
Feed Adapter into the connector. Push the lever down to
connect and lock into place.
8:
Pull up the levers of the other lever nut and insert the low
voltage -24VDC power supply wire and the black wire of the
Power Feed Adapter into the connector. Push the lever down
to connect and lock into place.
9:
Lightly tug on the wires to ensure they are secured in place.
10:
Place the lever nut connections inside the junction box.
11:
Place the Power Feed Adapter inside the End Power Feed
and tighten the slotted screw with a flat-head screw driver
to secure in place.
NOTE:
Refer to the TruTrack Recessed Channel instructions to
plaster and complete the installation.
LEVER
NUT
3/8"
6
8
7
LEVER
3
