2
END
POWER
FEED
TRACK
STRAIGHT
CONDUCTIVE
3
M3 SET
SCREW
D
4:
Secure the End Power Feed to the junction box with the #4-40 screw using a 1/16" Allen wrench.
5:
Secure the track to the ceiling using drywall screws.
E
DRYWALL
SCREW
4
5
DRYWALL
Section Two: Install 1RE End Power Feed
2
C
CUT
TRACK WITH COVER
INSTALLATION LENGTH
INSTALLATION
DIRECTION
1:
Cut a section of drywall to expose the junction box area.
2:
Mark and cut out the area where the installation will be
located using the junction box opening as a guide. Install
the drywall aligning it with the junction box.
NOTE:
Refer to the TruTrack Recessed Channel instructions to
measure and cut the track and cover before continuing.
1
END FEED
POWER
TRACK
SET
SCREW
STRAIGHT CONNECTOR
3:
Align and slide a track over the straight connector on the
End Power Feed. Tighten the set screws using an Allen
wrench and the slotted screw on the straight connector
using a flat-head screw driver.