3
6:
Unscrew the coaxial connector covers and remove from the
connector assembly.
F
CONNECTOR
ASSEMBLY
COAXIAL
CONNECTOR
COVER
COAXIAL
CONNECTOR
COVER
6
G
1.5MM ALLEN WRENCH
2MM ALLEN
WRENCH
M4 SET
SCREW
M3 SET
SCREW
7
8
7:
Using the provided 1.5mm Allen wrench, remove the M3
set screw from the coaxial connector assembly.
8:
Using the provided 2mm Allen wrench to loosen (
Do Not
Remove
) the M4 set screw.
9:
Slide the connector cover over the coaxial cable.
10:
Place the ferrule over the 3/8" braided wire of the coaxial
cable.
COAXIAL
CONNECTOR
COVER
BRAIDED
WIRE
H
FERRULE
9
10
FERRULE
COAXIAL
CABLE
CONNECTOR
ASSEMBLY
11:
Insert the coaxial cable into the coaxial connector until the wires of the center conductor are visible through the M3 set
screw hole.
NOTE:
Ensure that the split in the ferrule is aligned 90° from the M4 set screw (see inset).
I
COAXIAL
CABLE
11
CONNECTOR
ASSEMBLY
11
12:
Use the provided 1.5mm Allen wrench to replace and
securely tighten the M3 set screw.
1.5MM ALLEN
WRENCH
12
CONNECTOR
ASSEMBLY
COAXIAL
CABLE
M3 SET
SCREW
J
