4
Section Two: Connecting Channel Sections
1:
The L-Shaped Power Dual Circuit Connector physically
connects two Cirrus Suspension Modular Channels together
and conducts the power from two remote power supplies
powering both channels.
L
M
NOTE:
Omit steps 23 and 24 if using 4" Round or Square
canopy. Adjust fixture height by following step 26.
23:
Mount the cord grip assembly to the 2" plaster ring using
two #8-32 screws.
24:
Place the canopy over the cord grip against the ceiling.
Secure it in place by tightening the knurled nut to the cord
grip.
Make sure the knurled cap is not cross
threaded.
#8-32
SCREW
CORD GRIP
ASSEMBLY
CANOPY
KNURLED NUT
24
23
N
25:
Align the canopy with the crossbar and secure it using the
two #4-40 screws using a 1/16" Allen wrench.
26:
If necessary for fine adjustment of the fixture height push
the cord grip tabs to slide the fixture up and down until
desired height is achieved. Release the cord grip tabs to
lock the coaxial cables in place.
#4-40
SCREW
CORD
GRIP
CABLE
25
26
O
Indicates 24VDC
Power Flow
