PureAire Monitoring Systems, Inc.
26 |
P a g e
NOTE:
If on the second entry the password entered was not the same as the first, the display will
take you back to the “Re-enter Password Screen”. You will need to repeat steps 2 through 11. If
you do not enter the password correctly, the monitor remembers the last password that was
properly input.
If you misplace or loose your password, contact PureAire with the monitors DTM# for
instructions on recovering your password. The DTM# is displayed by moving the joystick to
the left.
5.4.1 Enable User Password
This menu permits the user to activate or disable the password function on the Oxygen
monitor. Push the joystick down.
“Enable User Password”
will scroll on the first line
of the digital display
Push the joystick right to display the status. If enabled it will display
”Enabled”
Push the joystick up or down to change the status. Once enabled or disabled is selected,
Push the joystick in the center to enter the new status. If correctly entered the display
will scroll
“Enable User Password”
5.4.2 Reset User Password
This menu permits you to reset
the password back to 557, as set at the factory.
Push the joystick right to display the menu,
“Reset to factory Default”.
…New Password Entry OK…
20.9%
…Enable User Password…
20.9%
Enabled
20.9%
…Enable User Password…
20.9%
…Reset User Password…
20.9%
…Password Reset to factory Default…
20.9%
