PureAire Monitoring Systems, Inc.
28
the Fault alarm relay state. The digital display will scroll the following:
To change this value, push the joystick right to display the relay state. The display will
Indicate
NORMAL.
This is the factory default state for the fault relay. Pushing the
joystick down will change the relay state from NORMAL to INVERT.
NOTE: When the Fault relay state is changed to INVERT, the Yellow alarm LED
will illuminate.
After entering the relay state push the joystick left to enter the setting. The display will
scroll the following:
Push the joystick left again to get back to the next menu. The display will
scroll the following:
..Format Fault Relay...
..Format Fault Relay...
NORMAL
INVERT
…Set Formats…
