PureAire Monitoring Systems, Inc.
24
NOTE:
If on the second entry the password entered was not the same as the first, the display will
take you back to the “Re-enter Password Screen”. You will need to repeat steps 2 through 11. If
you do not enter the password correctly, the monitor remembers the last password that was
properly input.
5.4.1 Enable User Password
This menu permits the user to activate or disable the password function on the Oxygen
monitor. Push the joystick down.
“Enable User Password”
will scroll on the first line
of the digital display
Push the joystick right to display the status. If enabled it will display
”Enabled”
Push the joystick up or down to change the status. Once enabled or disabled is selected,
Push the joystick in (like a doorbell) to enter the new status. If correctly entered the
Display will scroll
“Enable User Password”
5.4.2 Reset User Password
This menu permits you to reset the password back to 557, as set at the factory.
Push the joystick right to display the menu,
“Reset to factory Default”.
Push the joystick in, (like a doorbell) to reset the password back to 557.
Push the joystick left 4 times to go back to the measuring mode.
Enabled
…Enable User Password…
…Enable User Password…
CO2
405PPM
NOTE: If you lose your password
please contact PureAire with your
serial number or DTM number
…Reset User Password…
…Password Reset to factory Default…
