10
SYMBOL
MEANING
ACTION TO BE TAKEN
Alarm time cycle setting.
If the unit purges more than X (X amount set in AC) times in X hours, this could
mean that an illogical amount of condensate is being discharged in a period of X
hours. The alarm output is activated.
Use the
or
buttons to
choose 1-99 hours.
0 = disabled, 0 = default
Alarm Output setting.
The unit can be programmed to have a NO (Normally Open) or a NC (Normally
Closed) alarm relay output.
Use the
or
buttons to
choose NO or NC contacts.
NC = default
DO NOT CHANGE
1 = default
Sensing time setting.
When the condensate has reached a pre-defined level, the unit will wait for X
seconds of continuous detection before purging and opening the valve for X
(set in Pt) seconds.
Use the
or
buttons to
choose 0.1-9.9 seconds.
1 = default
Service Interval setting.
The unit will remind you every X weeks that it is time to clean or service the
unit.
Note: each time the power is switched off, the unit will add 1 week to its count
memory.
Use the
or
buttons to
choose 1-99 weeks.
0 = disabled, 0 = default
