Pure Power Tools m9802 Original Instructions Manual Download Page 8

8

Note

: If battery pack failure is suspected, we 

recommend that the operator inserts a new 

battery of known quality into the charger to 

check that the charger is working correctly. 

If the new battery charges correctly, then 

the original battery is probably defective and 

should be sent for safe recycling. If the new 

battery pack displays the same problems as 

the original, have the charger tested at an 

authorized service centre.

Warning:

When a battery becomes discharged due 

to prolonged use or exposure to direct 

sunlight or heat, always allow the battery 

pack to cool down before recharging. This 

will allow the battery to be recharged to its 

full capacity.

CHARGING TIMES

Normal charging time is approximately 

1 hour but this can vary depending upon 

circumstances.

a) If the battery pack is only partially 

discharged it may take less than an hour to 

recharge.

b) If the battery pack and ambient 

temperature are very cold then recharging 

could take up 1.5 hours.

c) If the battery pack is very hot it may not 

recharge. Allow it to cool right down before 

beginning the charging process.

MAINTENANCE

There are no user serviceable parts in this 

charger.

Keep the charger clean and free from oil 

and dirt etc. Clean with a dry cloth, and do 

not use chemical cleaners which may affect 

the plastic parts of the charger.

Regularly inspect the power cord and plug 

or damage.

Ensure that the ventilation slots do not 

become blocked. 

ENVIRONMENTAL PROTECTION 

Waste electrical products should not be 

disposed of with household waste. Please 

recycle where facilities exist. Check with 

your Local Authority or retailer for recycling 

advice. 

Summary of Contents for m9802













Reviews: