Pure Power Tools m9802 Original Instructions Manual Download Page 5

5

10.8V Li-ION 

Charger

2. Use this charger only with the designated 
Pure rechargeable battery packs.

 Other 

types of battery may overheat and burst 

causing personal injury or damage.

3. Do not abuse the charger cord. Never 
use the cord to carry the charger.

 Do not 

pull the cord rather than the plug when 

disconnecting from the power supply. 

Replace damaged cords immediately.

4. Ensure that the power cord is routed so 
that it does not pose a trip hazard. 

Also 

ensure that it cannot come into contact with 

sharp edges or moving parts which could 

cause damage to the cord.

5. Do not use any attachment not 
recommended or sold by the battery 
charger manufacturer.

 Use of unauthorised 

attachments or battery packs could lead to 

a significant risk of electric shock, fire or 

personal injury.

6.  Keep the power cord and the charger 
body from heat sources.

 Heat can damage 

the charger body and/or internal parts.

7. Do not use this charger if the cord or plug 
is damaged.

 A damaged cord or plug must 

be replaced before the charger can be used.

8.  Do not use the charger if it has been 
dropped, received a sharp blow or in any 
other way has been damaged.

 Have the 

charger checked at an authorized service 

centre.

9.  Do not disassemble charger.

 Take to 

an authorized service centre when service 

or repair is required.

10. Unplug the charger from the mains power 
supply when attempting maintenance or 
cleaning.

 This will reduce the risk of electric 

shock.

11. Disconnect the charger from the mains 
supply when not in use. Store in a locked 
cupboard out of children’s reach.

 Do not 

store with any other small metallic items 

that could fall into the charger battery-pack 

port. Do not store in locations where the 

temperature may reach or exceed 50

0

C.

12. Do not touch any of the uninsulated 
terminals in either the battery charger or 
the battery pack. 

Terminals may be ‘live’ 

and there is a risk of electric shock.

WARNING

This machine is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision or 

instruction concerning the safe use of the 

machine by a person responsible for their 

safety.

Children should be supervised to ensure 

that they do not have access to, and are not 

allowed to play with, this machine.

SAFETY LABELS & SYMBOLS
WARNING! 

Do not operate machine if warning and / or 

instruction labels are missing or damaged. 

Contact Evolution Power Tools for replacement 

labels.

 Symbol

Description

 V

Volts

 A

Amperes

 Hz

Hertz

 ~

Alternating Current
Double Insulated

Wear Safety 
Goggles

Summary of Contents for m9802













Reviews: