TROUBLESHOOTING THE AirMac-750E ELECTRONIC AIR CLEANER
Some of the common causes for malfunction of your air cleaner are listed below. Review
them should you have a problem, and perform the corrective measures listed here.
PROBLEM
POSSIBLE CAUSE
POSSIBLE REMEDY
Air Cleaner will not
operate
Speed control is in OFF position
Turn variable speed control
knob clockwise
Power cord not plugged in
Plug in power cord
Blown fuse in household, or
breaker tripped
Reset breaker
Cover removed
Replace cover and/or tighten
fasteners
Small volume of air
discharged from unit
Extremely dirty electronic filter
(cell)
Clean according to instructions
Plastic packing still on carbon
after-filter
Remove plastic wrap
Unit not effectively
cleaning the air
Electronic filter (cell) dirty
Clean according to instructions
Electronic filter (cell) is not
properly installed
Check reassemble instructions
Continuous “arcing” or
“snapping” noise
Excessive accumulation of dirt
on the electronic filter (cell)
Clean according to instructions
Electronic filter still damp
Allow filter cell to dry
completely
Bent or damaged plate on
electronic filter (cell)
Check and straighten
Odors more
pronounced than usual
Service life of carbon after-filter
expired
Discard and replace the
carbon after-filter
Air cleaner being used in a
confined space
Open doors to the adjoining
rooms
If any of the problems are not solved to your satisfaction, or if your AirMac-750E
Electronic Air Cleaner is not restored to proper operation, contact Pure n Natural
Systems at 1-800-237-9299.
Pure n Natural Systems, Inc. | https://purennatural.com | 1-800-237-9199
