MONITOR INSTRUCTIONS
FUNCTION BUTTONS:
MODE:
This button cycles through the available Displays and turns the unit ON
RESET:
Press the button once to reset unit data for the mode you are currently on.
Press the button and hold for 3 seconds to reset all values to zero.
NOTE: When the batteries are replaced, ALL values will reset to ZERO automati-
cally.
FUNCTIONS & OPERATIONS
1.Battery Installation:
This monitor takes 2 x AA 1.5V batteries. Install batteries under the cover in the rear of the monitor.
Note: Replacing the batteries will reset ALL values on the monitor to ZERO.
2.Auto On/Off:
The system turns on when the MODE key is pressed or when you begin to use the Stepper.
The system turns off automatically approximately 4 minutes after you have stopped using the unit.
1.
REPS/MIN-------------------------0~9999 (Steps per Minute)
2.
CALORIES------------------------0~99.99 (Calories burned)
3.
COUNT-----------------------------0~9999 (Number of Steps)
4.
TIME--------------------------------0:00~59:59 (Duration of exercise)
5.
SCAN-------------------------------6 SEC (Displays data (rotating) from all modes)
Note:
1.If the computer displays data abnormally, please remove the batteries and try again.
2.Battery Spec: 1.5V AA (2PCS).
3.Batteries must be removed from any equipment before disposal, and they must be disposed of/re-
cycled separately in accordance with local and state regulations.
